Introduce the product

Hello steel twin adhesive (F7)

💥Hello twin glue (7gr)

✨✨After drying, it can be carve,machinable and threaded like iron, and it is resistant to water, acid, gasoline and all kinds of solvents.

🔺strong

🔺 fast

🔺versatile

✨✨Hello twin adhesives are suitable for repairing and prevent water, oil, gasoline and acid leak in radiators, water pipes, cylinders, cartels, gas tanks, and to stick all kinds of metals, plastic, stones, ceramics, wood, glass and different materials to each other. The strength of this adhesive is such that two pieces of metal parts bend under the pressure of the clamp but do not separate.

✨Price: 27$

✨expiration date: 3 years after product

more details

💪💪

60 kg/cm2 is the permanent tensile strength and 300 kg/cm2 is the temporary tensile strength of this adhesive. So that two iron pieces bend under pressure but do not separate.

💥The thermal tolerance of this adhesive is 130 degrees.

🔻First drying time: 2 till 10 minutes (Depending on the temperature and composition of the two components)
🔻Second drying time: 3 hours
🔻Final drying time 24 hours

Product applications

Video of product introduction

How to use

If you do not succeed

✨✨

First, clean the desired area, then open each component of the adhesive with its own lid and , mix them quickly and immediately apply it to the desired area. Place the pieces on top of each other and stuck them together and do not move them.

Accuracy: Both operations (mixing the two components of the adhesive and applying the adhesive to the desired part) should be done in less than one minute.

If you need to dry the adhesive late or early, by increases the red component the reaction speed increases and it dries faster and vice versa.

1-First, the desired area must be completely free of dirt, adhesives, previous paints and completely dry.
2- Do not move the parts while drying.
3- The two components should be mixed quickly and completely and immediately applied to the desired area.
4- When you sticks plastics, or resolve the water and gasoline leaks, do not open the tap too early , it is better to open it after 24 hours and do not drip any drops of water.
5- The contact surface of the desired part is under 2mm and you must increase the contact surface.
6- Steel adhesive does not stick the silicone parts.
7- Steel adhesive does not stick polyethylene and polypropylene, but sealing them.

Safety:

In case of contact with eye, wash with water under pressure for 15 minutes and consult a doctor immediately. Avoid contact with skin and in case of contact, wash immediately with water and do not use solvent.
Keep out of reach of children under 8 years old.

Care :
Keep in a cool place (temperature 18-24) and away from direct sunlight. To keep the adhesive intact for next uses, take component A with part A of the spatula and component B with part B of the spatula and close the lid of each component with their own lid.